Generally, managed switches with deactivated EEE are preferred for Dante networks.

Follow this guide to find the features you need.

KLANG:vier can receive (Dante and ADAT comp.) and transmit (Dante) audio with 44.1 and 48kHz.

KLANG:fabrik can receive and transmit digitial audio (Dante, MADI, ADAT comp.) with single speed sampling rages 44.1/48kHz and double speed sampling rates 88.2/96kHz. At double speed, ADAT comp. inputs and outputs use SMUX format. MADI input can receive 28/32channel with high frame rate and SMUX. Transmit is always high frame rate with 32 channels.

KLANG:quelle can receive Dante audio with 44.1/48kHz, 88.2/96kHz and 176.4/192kHz.

KLANG:vokal, DMI-KLANG and :kontroller and :konductor can work with 48kHz and 96kHz and offer the exact same channel count / mix count with both sample rates.

I cannot see my KLANG device in Dante Controller… You have probably configured you Dante module for a static / fixed IP address and you need to discover the unit’s IP address and revert it to factory defaults.

Please check our <a href=”https://www.klang.com/blog/reset-dante/”>dedicated guide to recover Dante devices.</a>

KLANG:vier offers ADAT, Dante/AES67 interfacing. KLANG:fabrik offers optionally MADI and is a versatile audio format router.

A detailed overview of further audio standards and possible converters to connect 3rd party equipment to KLANG products is shown on our blog here…

You will find a step by step guide in our blog here…