Learn more in this guide on how to separate Dante and Control networks

Depending on your input channel requirements and the number of mixes required, more than one KLANG device can be connected to the same control network. Input channels arriving on KLANG:fabrik e.g. via MADI, can be routed to other KLANG:fabrik’s and KLANG:vier (48kHz only). Dante input channels can be routed to as many receiving devices as needed. Depending on the network load Dante Multicast flows have to be used and managed switches with proper IGMP snooping and QoS configuration should be used.

Most KLANG immersive processors can be configured to work in a cascade of units.

There is no limit other than your network limitiation as to how many KLANG:fabrik and KLANG:vier can be added to your network. KLANG:app will show each KLANG device available on your network.

Our products are designed and tested to be used with at least 1 :app or :kontroller per mix, plus 2 :apps for engineers. In most cases is is possible to use even more apps, there is no fixed limit.

To back up all internal settings, presets, and log files from every KLANG device and connected KLANG:app instance:

1. Open KLANG:app

2. Go to CONFIG > INFO > Collect All Logs

3. Wait until the button turns green

4. Click Save Logs as ZIP

5. Send the ZIP file to KLANG support if needed

This creates a full backup and troubleshooting package for your entire system.

Full instructions here

It is now possible to enter a KOS Login Password. Users need to know this password to connect to the processor in Show or Admin mode. Follow this link for more details.

Yes, channels can be hidden in KLANG:app running musician or personal mode and on kontrollers and therefore be protected from changes. Follow this link for more details.

The first two KLANG processors, namely :fabrik and :vier used the same hardware platform. These are the first generation (1st gen) KLANG processors and they both use the same KOS update files.

All processors developed after – :vokal, :vokal+, :konductor, DMI-KLANG – use a different hardware platform and are therefore called second generation (2nd gen) KLANG processors. The KLANG:kontroller is based on the same platform and uses the exact same KOS update files. The KOS firmware files for the 2nd generation processors are the same.

KLANG:quelle XDM uses a completely different firmware and hence update files.

KLANG:app has a built-in update system for Over-the-Air updates. It automatically downloads the correct firmware files from the internet and installs it on the device.

Both generations are compatible with the same KLANG:app and Show files can be exchanged between 1st and 2nd generation processors as well.

Follow this link for more details.

With KOS 5.4 it became possible to change the stereo panning laws on 2nd Generation KLANG processors.

The panning law used before KOS 5.4 is KLANG1. Along with the auto mapping feature for the DiGiCo console integration, the panning types D1 and D2 are introduced, these are identical to the type 1 and type 2 panning laws on a DiGiCo. By creating a new KLANG show file from scratch (Load default/defaultOff) panning law D1 is used. Mixes created on a DiGiCo with panning law type 1 while therefore sound identical when imported to as a starting point to KLANG.

The STEREOK3 panning laws are pseudo binaural pannings with different head geometries. Use these panning laws when some signals need to remain in Stereo (e.g. because less coloration is required) and still get improved sound transparency.

Set Stereo Panning Law is stored in a KLANG show file and will be recalled when loading a show file. It affects all mixes.

You can set values for specific parameters for channels in all mixes. Follow this link for more details.