Dante® is the industry-standard protocol for transmitting high-quality audio over IP networks. This guide will help you...
While simple setups with only a few Dante devices do not require any special configuration, more complex networks with a...
In order to perform best, DMI cards need to be at the DMI Firmware version that comes with the KOS version installed on ...
Normal Operation During KOS Firmware Update During KOS Firmware RECOVERY...
There are two redundancy scenarios: A fully redundant setup with a dedicated KLA...
Dante Follow is a feature on the KLANG:kontroller that automatically connects its Dante interface to the appropriate mix...
Differences in Dante Firmware Update KLANG products use different Dante modules, and not all follow the same update proc...
TL;DR: The CONFIG > CONNECT screen in KLANG:app is your hub for discovering a...
This manual explains how to route audio inside your KLANG processor and select t...
Learn more on how to separate Dante and Control with VLANs on second generation KLANG processors. :vokal The following s...
