KOS 5.6 | OUT NOW!

While KOS 5.6 is mainly all about vokal+, it adds EQs to the DMI-KLANG card and many smaller workflow improvements for t...

:vokal | Quick Start Guide

Step 1 | Connections Connect a computer or switch to one of the combined Dante/CONTROL network ports. Step 2 |...

:app | Quick Start Guide

Learn everything from the basic features to more advanced workflow options of KLANG:app for Windows, Mac, Android an...

KLANG:app does not discover any devices

Check the Quick Start Guide for your KLANG hardware: KLANG:app communicates over IP network messages. KLANG:app sends OS...

DiGiCo Console Integration | Setup Guide

STEP 1 | DMI-KLANG INSTALL STEP 2 | NETWORK IP SETUP STEP 3 | AUDIO ROUTING STEP 4 | IMPORT AUX MIX to KLANG 1 | Co...

Dante | Quick Start Guide

In this article we will guide you through the first steps in Dante routing. As an example, we use Dante Virtual Soundcar...

Network Switches | Quick Start Guide

While simple setups with only a few Dante devices do not require any special configuration, more complex networks with a...

Where to Place Different Instruments

In general, binaural processing allows you to easily distinguish sounds based on their direction of arrival rather than ...

Status LED Colors

:vokal & DMI-KLANG :vier Normal Operation During KOS Firmware Update During KOS Firmware RECOVERY...

Console Integration | For Redundant Consoles

There are two scenarios: A fully redundant setup with a dedicated KLANG:processo...