Manuals

Redundancy

Preparation

Setup your mixes on your primary KLANG processor.

CONFIG > PRESET > select preset > TRANSFER to KLANG:app

Login to backup KLANG processor.

CONFIG > PRESET > select preset with (remote) suffix > TRANSFER to backup processor

Configure Cascade with Backup KLANG Processor

  1. Login to primary KLANG processor
  2. CONFIG > INFO > SET > Set Unit Name
  3. Enter Name: KLANG(1)
  4. Login to backup KLANG processor
  5. CONFIG > INFO > SET > Set Unit Name
  6. Enter Name with an underscore after the cascade number: KLANG(1_)
  7. Login to primary processor

The backup processor will be shown in gray.

When working on mixes or presets on the primary processor, all control messages will also be sent to the backup processor

How to switch to Backup processor

If the primary processor is not available, there are two options:

  1. Manually log into the corresponding mix on the backup processor.
  2. With KLANG:app in admin mode login to backup processor CONFIG > INFO > SET > Set Unit Name and delete the underscore prefix. All KLANG:apps will recognise the backup processor as the new primary processor.

Still Have Questions?

Contact us here