The Set Menu

Advanced Features via Set Menu
Advanced features for pro users and IT experts only.
Go to CONFIG > INFO > Set Menu

Set Unit Name
By default the Unit Name equals the serial number of the device. KLANG:app alphabetically sorts devices based on the unit name. 
Find out how to use the Unit Name to cascade units.

Enter a name and assign it to the unit by clicking on Set. Unset reverts the unit name to the serial number.
Set Fixed IP
Please note that the KLANG personal mixing system and the Dante module included in :fabrik, :vier, :vokal and :kontroller are different network devices and have different network settings, i.e. they have different IP addresses. This setting here will change the IP of the KLANG personal mixing system control server. If you want to change the IP address of your Dante device go here. 

We highly recommend to leave the IP settings to DHCP client only.
This will assign a second IP – which is fixed – (not the Dante Module but the 3D in-ear mixing server). The first IP will always stay on DHCP client, so you can access your unit even if you forgot your fixed IP address settings.
Please note: if you have an DHCP server running on your network and you want to use fixed IPs make sure that these IPs do not overlap with the ones assigned by the DHCP server. KLANG:fabrik/ KLANG:vier will have 2 IP addresses (+1 for the Dante module). KLANG:app will only show your hardware once in the device list depending on which IP address appears first.
We highly recommend to leave the IP settings to DHCP client only.
Assign a fixed IP in the first line, e.g. 192.168.1.10.
Subnet Mask in the second line. Make sure the subnet mask on all devices running KLANG:app and on the processor are EXACTLY the same. Otherwise the discovery of the processor will not work.
Default Gateway (GW) in the third line. (default: empty. Leave blank if not required, or the same as the IP but with a .1 in the end)

If Fixed IPs are used, please make sure to configure the network settings of the remote devices running KLANG:app accordingly. It is recommended to specify the standard gateway and DNS server as well to prevent e.g. device discovery issues on iOS or macOS. If unsure just enter the IP address of your KLANG:fabrik but substitute the last digit to x.x.x.1 and enter this IP for DNS server and standard gateway in your system network settings e.g. on iOS or macOS.
Factory Reset
This will delete all settings and presets stored on the unit. You need to enter the last digits of the serial number manually to avoid deleting all settings by accident.

Advanced Gain Structure
KLANG’s mixing engine uses floating point and hence cannot clip internally and the engine can by default handle gains above 0dB without any issues. In some cases the digital input signal is too low due to unbalanced gain structure in the mixing console. The new CONFIG > Set > Advanced > Max. Fader Gain +6dB option increases both the channel and the master fader range up to +6dB. This yields in a maximum digital gain benefit of +12 dB.
The setting Max. Fader Gain +10dB increases the channel gain limit to +10dB but the master volume is limited to 0dB. This is useful for the DiGiCo console link and will be activated automatically for the console link www.klang.com/digico.
The default can be restored by selecting Max. Fader Gain +0dB on all KLANG:apps
It is now possible to enter a KOS Login Password. Users need to know this password to connect to the processor in Show or Admin mode.
If they do not have proper access, their apps will be limited to musician and personal mode.
CONFIG > CONNECT allows to remotely configure KLANG:apps
CONFIG > INFO > SET > Set Show/Admin Passwor

With 5.4 many more features of :kontroller can be activated and deactivated to offer the exact feature set required for the production via KLANG:app > CONFIG > INFO > SET [KKA-258]
Quick :kontroller Presets
Three quick presets offer a faster configuration of the most used :kontroller settings. Use 2nd/alt and click on the quick preset to broadcast this to all :kontrollers on the network.

Only group mixing: disables all advanced banks except for the group bank. No preset menu is shown.
Channel mixing with presets: Disables the groups bank and the config menu but offers local presets similar to old-fashioned personal monitor mixers.
Full mixing access: Enables all features of :kontrollers and could be considered the admin mode. This is the default mode.
Customize :kontroller Behavior

[KKA-37] ktrl Disable Channel Edit
Show/hide Decibels Setting
In channel and group banks no dB values are shown, except when a value is currently being changed [KKA-382].

Switch dark…
Switch dark until touched, turns all LEDs and Displays (except for the last one) of :kontroller off. This is particular useful for theatres when the stage should be as dark as possible. With a push on any rotary button, the dark mode can be exited. [KKA-120]
In order to revert all :kontroller back to normal operation, use “Switch lights back on”.
More
[KKA-384] Channel config > Assign Group only shown when in admin mode and groups available
[KKA-339] IP address and version shown in ktrl connect screen when no KLANG processor found
[KKA-365] Show ktrl overlay, when OTA is in progress
[KKA-304] unified naming in ktrl audio settings
DON’T show demo mode
This will hide the demo mode from the Connect screen and prevent users to accidentally activate it during a show.
Reset error counters
Reset all error counters but leave all presets on the hardware.
Verbose Logging
Activate this function if requested by KLANG support.