Blog Products: DMI-KLANG
How many KLANG devices can be connected?
Depending on your input channel requirements and the number of mixes required, more than one KLANG device can be connected to the same control network. Input channels arriving on KLANG:fabrik e.g. via MADI, can be routed to other KLANG:fabrik’s and KLANG:vier (48kHz only). Dante input channels can be routed to as many receiving devices as needed. Depending on the network load Dante Multicast flows have to be used and managed switches with proper IGMP snooping and QoS configuration should be used.
Most KLANG immersive processors can be configured to work in a cascade of units.
There is no limit other than your network limitiation as to how many KLANG:fabrik and KLANG:vier can be added to your network. KLANG:app will show each KLANG device available on your network.
How many :apps can be connected to KLANG immersive processors?
Our products are designed and tested to be used with at least 1 :app or :kontroller per mix, plus 2 :apps for engineers. In most cases is is possible to use even more apps, there is no fixed limit.
How to backup all settings and collect log files?
Where it used to be two different processes to gather log files and presets from KLANG hardware via USB export and email logs , K:a now collects all logs automatically. Follow this link for more details.
How to protect mixes with a password?
It is now possible to enter a KOS Login Password. Users need to know this password to connect to the processor in Show or Admin mode. Follow this link for more details.
Can I protect channels from changes?
Yes, channels can be hidden in KLANG:app running musician or personal mode and on kontrollers and therefore be protected from changes. Follow this link for more details.
What’s the difference between 1st and 2nd generation KLANG processors?
The first two KLANG processors, namely :fabrik and :vier used the same hardware platform. These are the first generation KLANG processors and they both use the same KOS update files.
All processors developed after – :vokal, :vokal+, :konductor, DMI-KLANG – use a different hardware platform and are therefore called 2nd generation KLANG processors. The KOS firmware files for the 2nd generation processors are the same.
Both generations are compatible with the same KLANG:app and Show files can be exchanged between 1st and 2nd generation processors as well.
What sample rates does DMI-KLANG support?
It supports all sample rates that are supported by the host (console or Audio DMI card in slot 1 of an Orange Box) and it will follow automatically.
Does DMI-KLANG have root intensity EQs?
No. DMI-KLANG does not offer EQs. This feature might be added in future KOS versions.
Can DMI-KLANG control an Orange Box?
Yes, that is possible with KOS 5.5. Find out more…
How to cascade KLANG processors for more mixes?
Follow this link for more details.